Wideband AFR modernized.
The new PLX Wideband AFR Smartphone combo takes engine efficiency to the next level. Our Wideband SM-AFR controller coupled with the new MultiGauge Link™ allows you to wirelessly send data to any smart device eliminating the need to install dedicated gauges in your vehicle. Simply launch the MultiGauge™ app, available now for Apple and Android, to instantly connect to your smart device for brilliant real-time gauges.
MultiGauge™ app for Apple and Android
The app automatically detects your PLX sensor modules and configures your gauges. MultiGauge reports both 0-15 PSI and 0-30 PSI boost ranges in both imperial / standard and metric units.The AFR sensor module supports lambda as well as all fuel types–gasoline, diesel, methanol, ethanol, E85, CNG, and LPG.
With both AFR and and Vac/Boost modules attached, MultiGauge automatically configures to display both parameters. This combination allows for advanced features like intelligent warning which alert you if your engine is running in unsafe conditions.
Already have sensor modules?
The MultiGauge Link™ is all you need to connect your existing sensor modules to your smart device for a new and updated user experience. If you already have our SM-AFR + DM-6 gauge combo, simply connect our y-splitter and you can run DM-6 and MultiGauge™ app simultaneously.
Popular Configurations
PLX Wideband now employs the innovative PLX Devices new intelligent health monitoring technology where the oxygen sensor is meticulously monitored every 2mS (488 times per second) to obtain peak performance, accuracy and reaction time. Coupled with the updated patented DM-6 touch screen MultiGauge, battery voltage is displayed from 9V-20V, sensor life is displayed from 0-100%. The oxygen sensor reaction time is displayed from 10mS/1000mS on the brilliant high contrast OLED display.
Gen3 vs. Gen 4/5
- More accurate
- Uses only 7.5Watts compared to 10Watts
- Faster response time
- Improved sensor durability
- Faster warm up time
- Maintains accuracy throughout life
- Less susceptible to contamination to surrounding pollution
- 10+ years of average service life
*Due to continuous product improvement, actual product may differ slightly from photos.
MultiGauge Link
Tech Specs for MultiGauge Link:
Voltage: 3.3V
Power Consumption: 0.1 Watts
Wireless: Bluetooth 4.1
Serial Interface: 19200 Baud 8N1
Range: ~50ft line of light
Operating Temperature: 0 - 80 Deg C
Firmware Updatable: Yes, OTA (Over the Air)
Module dimensions: 0.2" x 0.6" x 1.2" (3mm x 15mm x 30mm)
Cable length: 2.5"
SM-AFR Wideband O2 Controller:
1) 12V power input
2) 4 prong analog clip
3) Termination jumper
4) Serial RX Plug (In)
5) Serial TX Plug (Out)
6) Sensor Input Clip
Physical Dimensions: 2 x 2.875 x 1.125" (52 x 75 x 28mm) L x W x H
Technology: PLX Critical Response Technology, Fast Response PID
Accuracy: < 0.1AFR (Gasoline) Wideband, < 0.2AFR (Gasoline) Narrowband
Measurement Range: 10-20 AFR (Gasoline), 0.68 - 1.36 lambda (Gasoline),
0 - 100 O2 Sensor Health, 0 - 1000 mS Reaction Time, 9 - 20 Volts
Analog Outputs: Wideband Linear 0-5V, Narrowband 0-1V (Driving Current 20mA)
Operating Voltage: 9V-20V
Power Consumption: 20 Watts (Max), 13 Watts (Typical)
Power Supply Technology: High Efficiency Switching with Soft Start Technology
Operating Temperature: 0 - 85 Deg Celsius
Sensor: One Bosch LSU 4.9
Enclosure: Automotive Grade Plastic
